The CAM 4.0-P-12kg is a reinforced type based upon the design of the CAM4.0-P. It provides higher antenna load capability. This antenna mast is suitable for use in either open areas or in electromagnetic absorption chambers. Guy wires and anchoring pins are available for antenna installation in open areas. The CAM 4.0-P-12kg antenna mast has no metal parts above the drive unit. Special designs are available upon request. The mast tube can be delivered in 2 separate parts for easy transportation and storage. Polarisation rotation is always around the antenna axis to avoid elevation errors. The GPIB (IEEE 488) bus, when operated with the MCU Controller, provides an additional control option for all functions.
Compact Antenna Mast CAM – Technical data
| Features | Figures |
| antenna height | 1.0m – 4.0m (electrical) |
| total mast height | 4.4m |
| material | PVC + fibre glas, weatherproof |
| mast cross-section | 100mm x 100mm |
| base | 0.8m x 0.6m (L x W) |
| antenna weight (max.) | 12kg max., depending on the distance of
the antenna centre of gravity |
| positioning speed | adjustable between 4 – 15 cm/sec |
| positioning accuracy | ±1cm |
| polarisation | 0°/90° (vertical/horizontal) |
| polarisation time | 0°/90° approx. 3sec |
| polarisation drive | pneumatic rotary actuator |
| remote control | via IEEE interface |
| pressure | max. 6bar |
| temperature range of operation | –10°C ... 35°C |
| current consumption | max. 2A |
| motor | brushless DC motor, 150W |
| voltage | 208V – 230V, 50/60 Hz, single phase |
